MAE SOT, Thailand — The morning he was shot in January 2024, insurgent soldier Pan Pan, 31, was on his technique to acquire a meal pack from the executive members of his resistance group, the White Tiger Battalion.
It was 7 am, early and quiet — too early, the Burmese frontline soldier thought, to hassle placing on his helmet as he walked alongside the Asian Freeway in Kawkareik township, Myanmar.
That was when the bullet from a sniper, ricocheting off a close-by brick, tore by the insurgent soldier’s proper ear and got here straight out his nostril.
He doesn’t bear in mind a lot after that.
To save lots of him, docs eliminated a big a part of his cranium and mind on the correct facet, leaving him blind in a single eye and with a deep, comfortable indent in his head. He grew to become extraordinarily susceptible — any unintentional impression might show deadly.
For the previous 12 months and a half, Mr Pan lived cautiously. He slept solely on his left facet, consistently defending his head from hurt.
However now, a free customized 3D-printed cranium cowl, offered by non-profit group Burma Youngsters Medical Fund (BCMF), provides Mr Pan an added layer of safety.
Beneath his unassuming black cap, the duvet — fixed with Velcro — sits snugly atop his sunken cranium.
“Now, I don’t want to fret that I’d fall down once more,” he stated.
Myanmar’s battle is creating extra survivors like Mr Pan, who’re wounded and in want of long-term, specialised medical assist.
Rising casualties
Widespread resistance unfold throughout the nation after the military forcefully seized power in 2021with civilians taking over arms to withstand the regime’s brutal marketing campaign. The navy retaliated with airstrikes and mass arrests, silencing opposing voices with lethal pressure.
A minimum of 6,000 civilians have been killed by Myanmar’s navy prior to now 4 years, in line with the Help Affiliation for Political Prisoners, a Thailand-based rights group based by Burmese former political prisoners residing in exile.
In 2023, the nation recorded the world’s highest variety of new annual casualties, with greater than 1,000 deaths brought on by antipersonnel landmines and explosive remnants of conflict, the Landmine Monitor Report 2024 discovered.
Survivors face devastating long-term penalties: burns, amputation, and different life-altering accidents. The necessity for specialised care and prosthetics has soared.
Printing out hope in plastic
To assist fulfill this rising want for prostheses, BCMF is popping to unlikely options: plastic filaments and 3D printers.
Based in 2006 to assist youngsters alongside the Thai-Myanmar border entry complicated surgical procedures, BCMF later expanded its companies to assist different susceptible teams.
In 2019, founder Kanchana Thornton met a boy with a beginning defect that disallowed him to stroll on his personal. He was too younger to bear the limb amputation wanted to suit prosthetics.
Decided to assist, analysis led Mrs Thornton to a documentary a few man who 3D prints prosthetic limbs in his storage.
Impressed, she contacted him, and he assured her 3D printing was simple — requiring only a printer and free software program to start out.
With $10,000 AUD ($8,491 SGD) in seed funding from a donor, BCMF began its 3D printing lab with two printers.
It now has six machines and has produced free 3D-printed prostheses for 150 sufferers, a few of whom have acquired a number of medical gadgets.
In 2025, lead technician and former medical nurse Aung Tin Tun helped produce 40 distinctive assistive gadgets for sufferers.
These vary from “easy” designs, which might be produced in 4 to 6 hours, like beauty hand prostheses, to useful limbs, which might comprise over 100 components and take a full day to print.
Most just lately, Mr Tun produced an above-elbow arm prosthesis fitted with springs and silicone grip pads so affected person Thar Ki, 28 can clutch the handlebar of his motorbike.
Three years in the past, the previous insurgent soldier was testing handbombs when a grenade went off unexpectedly in his proper hand.
“After the accident, I felt like I couldn’t do something anymore,” Mr Ki stated.
Now, along with his 3D-printed arm, he can journey his motorbike once more.
At a typical hospital, Mr Ki would have needed to fork out upwards of 40,000 baht ($1,605 SGD) for the prosthesis he acquired — a hefty worth for migrants like him who’re normally unemployed or paid below Thailand’s official minimal wage of 352 baht ($14.13 SGD).
Whereas the manufacturing price of 3D printing a typical prosthetic arm averages round $100 USD ($129.36 SGD), BCMF covers the price absolutely for migrants.
Mrs Thornton stated that BCMF spends some $30,000 USD ($38,800 SGD) to maintain the 3D printing lab operational yearly.
High quality for gratis to sufferers

Regardless of being free, the prostheses bear rigorous testing earlier than being handed to sufferers.
Utilizing open-source designs discovered on-line, Mr Tun’s workforce “remixes” and customizes every half to a affected person’s scanned measurements on a 3D printing software program.
Strings and is derived are then examined for pressure, to tailor the grip to pure hand motion.
“If the design just isn’t good, we gained’t give it to the recipients,” stated Mr Tun.
Whereas a synthetic limb might be printed inside 24 hours, the method just isn’t at all times clean. Often, printer nozzles jam, sudden energy cuts halt manufacturing, and prototypes fail. Every error means wasted time, supplies, and cash.
Nonetheless, he says it’s value it.
“For me, it’s only a very small quantity of contribution. However for the sufferers, it’s very impactful of their each day lives,” he stated.
Studying on the job
As a result of area of interest nature of the work, many of the workforce at BCMF lack formal experience in biomedical engineering or 3D printing.
Mr Tun, as an illustration, had simply three weeks of hands-on expertise in a Thai hospital to find out about 3D printing. Conventional prosthetists usually practice for years.
“Typically we’ll have an thought for a selected design however we can not absolutely utilise the software program,” he stated. “I’m nonetheless studying day by day.”
To bridge this hole, BCMF brings in exterior specialists and scholar interns from Canada’s Queen’s College, who help with software program and manufacturing.
The load plastic limbs can’t bear

Dr Trevor Binedell, principal prosthetist at Singapore’s Tan Tock Seng Hospital, stated that regardless of its promise, 3D-printed gadgets are typically much less strong and adjustable than conventional choices.
Supplies used, like thermoplastic polyurethane — generally used within the manufacturing of shoe soles and hoses — are usually not sturdy sufficient to bear human weight, leaving BCMF at present unable to make prosthetic legs.
Sufferers with decrease limb amputations have to search out their footing at a standard prosthetic manufacturing unit within the well-known Mae Tao Clinic (MTC) as an alternative.
Positioned only a brief stroll aside inside MTC’s compound, the 2 departments incessantly collaborate to higher serve sufferers. Often, BCMF will 3D print prosthetic components on the different’s request.
The standard cast-and-mould strategies take technicians as much as 5 days to make a leg, however the casting course of supplies sufferers with higher match and management, Dr Binedell stated.
“Whereas (3D printing) know-how is promising, it nonetheless wants time to mature earlier than it might probably constantly meet the calls for of lower-limb functions,” he added.
Room for enchancment
Though free prostheses have helped sufferers develop into extra assured in each day life, consolation and weight stay a problem.
Mr Pan jokes that if he wears his cranium cowl for too lengthy, he may begin leaning to 1 facet.
As for Mr Ki, he solely makes use of his prosthetic arm when using his motorbike as he feels it’s too heavy for each day put on — he estimates it weighs a few kilogram.
“I can’t actually complain as a result of it’s free and I respect the assistance,” he stated. “But when they make a lighter one, I’d use it extra usually.”
3D printing know-how might not be good — however for survivors in Mae Sot like Mr Ki and Mr Pan, it makes all of the distinction. – Rappler.com
https://weblog.passive-income4u.com/create-your-very-own-auto-publish-news-blog-site-and-earn-passive-income-in-just-4-easy-steps/
https://www.rappler.com/individuals/free-3d-printed-prostheses-war-amputees-myanmar/



